Leaf Chain

Leaf chains consist of pins and plates only and therefore are greater in strength than roller chains. They may be appropriate for tasks like hoisting and pulling. Leaf chains conform to ANSI and have two types: AL and BL.
AL type
To the use that static load is utilized with very little concern of sporting.
BL style
To the use that dress in resistance is required considering that influence load is applied.
Selection of leaf chains
The chain dimension is chosen in accordance for the following formula:
Acting tension?¨¢Service factor¡§QMaximum allowable stress Notes:
one. Acting stress includes the dead excess weight in the chain, the fat with the attachments and inertia.
2. In the event the chain speed exceeds thirty m/min, use a roller chain.
Minimal sheave diameter: S.D = Chain pitch?¨¢5
Minimal width involving flanges: L = Overall length of pin?¨¢1.05
?If connecting pins are provided: L¡§R2L1?¨¢1.05
F.D = S.D + Maximum hyperlink plate height (H) Note:?If dimension H exceeds 25.four,
F.D = S.D + 25.four might be adopted because the minimum flange outer diameter.
Periodical inspection and instructions for replacement
You should definitely carry out periodical inspection and lubrication to confirm safety and prolong chain existence. Troubles and directions for alternative are outlined inside the following.
Problem:Circumferential dress in of plate
Option:Change the chain if dress in reduction gets to be five % of H.
Dilemma:Oblique put on of plate and pin head
Remedy:Align the unit.
Problem:Abnormal protrusion or rotation of pin head
Resolution:Replace the chain Lubricate and get rid of overload.
Dilemma:Wear elongation
Resolution:Change the chain when its length gets to be one.03L. Note: Put on elongation of the
chain lowers its tensile strength.
Dress in elongation of 3% lowers the tensile power by 18 percent.
The put on life of chain may be improved by lubrication. Change the chain.
Difficulty:Cracked plate (one)Crack: From the hole of a link plate towards the end of your link plate while in the direction perpendicular to tension path.
Solution:Substitute the chain which has a chain of increased greatest allowable stress, or reduced the load or dynamic (shock) load.
Dilemma:Cracked plate (two)Crack: In an oblique direction against tension course.
Alternative:Exchange the chain, and guard from corrosive circumstances.
Dilemma:Broken plate(by higher tension)
Option:Exchange the chain, and get rid of the bring about of overload.
Challenge:Enlarged plate hole
Solution:Change the chain, and do away with the induce of overload.
Challenge:Corrosion of pit
Remedy:Exchange the chain, and safeguard from corrosive situations.


As one of leading worm gear boxes manufacturers, suppliers and exporters of products, We offer sworm gear box and many other products.

Please contact us for details.

Mail:[email protected]

Manufacturer supplier exporter of worm gear box

Recent Posts